Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
Phoenix Smart IP43 Charger 24/16 (1+1) 120-240VAC Requires 5-15P Mains Cord (cord not included)
With boat owners in mind, this adaptive 5-step charger can provide either 30A or 50A of charge to each of the three battery banks. Or the Phoenix 1+1 model provides 3A to the starter battery, the rest to the ‘house’ bank. 24V models are available with a 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone.
Features:
- Bluetooth Smart built-in: The wireless solution to set up, monitor, update and synchronize Phoenix Smart IP43 Chargers.
- Phoenix Smart (1+1): two outputs to charge 2 battery banks: The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery.
- Phoenix Smart (3): three full current outputs to charge 3 battery banks: Each output can supply the full rated output current. But the total of the 3 outputs combined can never exceed the current rating of the charger.
- Automatic voltage compensation: The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases.
- Adaptive 6-stage charge algorithm: bulk– absorption – recondition – float – storage – refresh: The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimize the charging process relative to the way the battery is being used.
- The right amount of charge: variable absorption time: When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery will be fully charged.
- Preventing damage due to excessive gassing: the BatterySafe mode: If in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
- Less maintenance and aging when the battery is not in use: the Storage Mode: The Storage Mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the Storage Mode, float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
- Also charges Li-ion (LiFePO4) batteries: Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively, full control of voltage and current can be achieved with Bluetooth.
- Fully programmable charge algorithm: The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button.
- Optional external battery voltage and temperature sensing via Bluetooth: A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more Phoenix Smart IP43 Chargers.
- Remote on-off: The remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low.
- VE.Direct interface: For a wired data connection to a Color Control panel, PC, or other devices.
- Programmable relay: Can be programmed using the VE.Direct interface or a Bluetooth-enabled device to trip on an alarm or other events.
- Synchronized charging: Pairing two or more Phoenix Smart IP43 Chargers in a VE.Smart Network, enables synchronized charging. This improves the charge efficiency and battery life.
Specifications:
- Charger Input - Voltage: 120/240v
- Charger Output - Amps: 16a
- Charger Output Voltage: 24v
- Charging Banks: 1+(1)
- Portable: No
- Box Dimensions: 6"H x 10"W x 11"L WT: 7 lbs
- UPC: 8719076053521
Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)
FAQs
Product & Usage
1. Is your gear authentic and warranty-backed?
Yes — we are an authorized US dealer for 300+ marine electronics brands. Every order ships with the manufacturer’s full warranty.
2. Are these products beginner-friendly?
Yes. Our products are designed for both seasoned boaters and first-time owners. Each unit ships with a manufacturer manual, and we’re happy to answer setup questions over email.
3. Are these products built for marine conditions?
Yes. Marine electronics are engineered for saltwater spray, vibration, and weather. Check the product specs for IPX waterproof rating and saltwater certifications.
Maintenance & Accessories
1. What maintenance does marine electronics require?
Rinse with fresh water after saltwater exposure, store in a dry place, and follow your manufacturer’s cleaning and storage instructions.
2. Can I buy replacement parts and accessories separately?
Yes — we carry replacement parts, mounts, transducers, cables, and accessories for the brands we stock.
3. Do you provide product manuals or installation guides?
Every product ships with the original manufacturer’s manual. Digital copies and detailed installation guides are typically available on the brand’s website.
Warranty & Guarantee
1. Does my purchase include a warranty?
Yes — every order includes the full manufacturer warranty. Coverage length varies by brand (typically 1–3 years for Garmin, Lowrance, Raymarine, Simrad, Humminbird, Furuno, and others).
2. How do I register for warranty coverage?
Register directly with the manufacturer using your unit’s serial number. Manufacturer registration is the fastest path to warranty support if you ever need it.
3. What does the manufacturer warranty cover?
Defects in materials and workmanship under normal use. Damage from impact, improper installation, or saltwater corrosion (without protection) may be excluded. Check brand-specific terms in your unit’s documentation.
4. Can I extend the warranty?
Some manufacturers offer extended-coverage programs through their registration portals. We don’t sell third-party warranty programs.
Purchasing & Support
1. How fast does my order ship?
Orders placed before 4pm EST Monday–Friday ship the same business day via UPS from our NJ or FL warehouses. Continental US delivery typically takes 3–7 business days for Economy.
2. Do you offer bulk or fleet pricing?
Yes — we offer volume pricing for fleet operators, marinas, dealers, and commercial customers. Email support@marineelectronicsdepot.com with your needs.
3. How can I contact support?
Email support@marineelectronicsdepot.com or call during business hours (Mon–Fri 9am–5pm ET). We’re happy to help with pre-purchase questions, order status, or post-sale support.
Can’t find your answer?
Recently viewed
Last seen items
