Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
Pro Installer 400A EZ-Mount Dual Bank Control Battery Switch - MC10
Another addition to our multi award winning Pro Installer EZ Mount range, the innovative Dual Bank Control switch is like 3 switches in one, House, Start, and Emergency Parallel. Offering easy intuitive control for the boater, the Dual Bank Control switch features a unique isolated-On position which allows use of house loads and VHF radio if the engine needs to be electrically isolated, or allows the engine to be isolated during servicing while still providing power to house loads (for lighting, stereo, fridge etc). For boats or vehicles with single Engine and House battery bank, Dual Bank Control allows the use of optimized battery banks for their respective loads; an appropriately sized deep cycle bank for House loads, and thin plate starting batteries for the Engine. Further, sensitive electronics are isolated from starter motor induced voltage spikes because House and Engine loads are separated during normal operation, unlike Selector battery switches. As easy as 1, 2, 3, these revolutionary EZ Mount battery switches allow you to wire from the front for the easiest surface mounting. With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze.
- Tested to UL1107 ignition protection, CE
- Tinned copper 10mm (3/8 inch) studs
- Stainless steel washers and nuts
- Fiber reinforced plastics
- 400A Continuous / 600A 5 minutes Intermittent / 1500A 10 seconds Cranking (cable size to achieve ratings 120mm}, 4/0, smaller cable size will reduce the Amp rating)
- Waterproof to IP67
- Same interconnection height as Pro Installer
- Removable knob allows isolation during servicing
- 3 removable side plates for protection
- Industry standard 3.85 x 3.85 inch footprint
- For surface mounting only
- Each Pro Installer battery switch is fully tested for pressure sealing, rotation force and electrically load tested
Specifications
Mounting: Surface Only
Voltage: 48v DC (for 12-48v systems, both banks must be same voltage)
Rating: 400 Cont / 600 Inter / 1500 Crank
Dims: 3.85" x 3.85" x 3.62"
Operation: 1, 1/2, Parallel, Off
Stud: 4x 10 mm (3.8")
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Specifications:
- AFD: No
- Lockable: No
- Positions: 1-1/2-Parallel-Off
- Continuous Amperage: 400a
- Box Dimensions: 3"H x 7"W x 8"L WT: 1.4 lbs
- UPC: 843687008583
Quick Guide (pdf)
Owner's Manual (pdf)
FAQs
Product & Usage
1. Is your gear authentic and warranty-backed?
Yes — we are an authorized US dealer for 300+ marine electronics brands. Every order ships with the manufacturer’s full warranty.
2. Are these products beginner-friendly?
Yes. Our products are designed for both seasoned boaters and first-time owners. Each unit ships with a manufacturer manual, and we’re happy to answer setup questions over email.
3. Are these products built for marine conditions?
Yes. Marine electronics are engineered for saltwater spray, vibration, and weather. Check the product specs for IPX waterproof rating and saltwater certifications.
Maintenance & Accessories
1. What maintenance does marine electronics require?
Rinse with fresh water after saltwater exposure, store in a dry place, and follow your manufacturer’s cleaning and storage instructions.
2. Can I buy replacement parts and accessories separately?
Yes — we carry replacement parts, mounts, transducers, cables, and accessories for the brands we stock.
3. Do you provide product manuals or installation guides?
Every product ships with the original manufacturer’s manual. Digital copies and detailed installation guides are typically available on the brand’s website.
Warranty & Guarantee
1. Does my purchase include a warranty?
Yes — every order includes the full manufacturer warranty. Coverage length varies by brand (typically 1–3 years for Garmin, Lowrance, Raymarine, Simrad, Humminbird, Furuno, and others).
2. How do I register for warranty coverage?
Register directly with the manufacturer using your unit’s serial number. Manufacturer registration is the fastest path to warranty support if you ever need it.
3. What does the manufacturer warranty cover?
Defects in materials and workmanship under normal use. Damage from impact, improper installation, or saltwater corrosion (without protection) may be excluded. Check brand-specific terms in your unit’s documentation.
4. Can I extend the warranty?
Some manufacturers offer extended-coverage programs through their registration portals. We don’t sell third-party warranty programs.
Purchasing & Support
1. How fast does my order ship?
Orders placed before 4pm EST Monday–Friday ship the same business day via UPS from our NJ or FL warehouses. Continental US delivery typically takes 3–7 business days for Economy.
2. Do you offer bulk or fleet pricing?
Yes — we offer volume pricing for fleet operators, marinas, dealers, and commercial customers. Email support@marineelectronicsdepot.com with your needs.
3. How can I contact support?
Email support@marineelectronicsdepot.com or call during business hours (Mon–Fri 9am–5pm ET). We’re happy to help with pre-purchase questions, order status, or post-sale support.
Can’t find your answer?
Recently viewed
Last seen items
