Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
SmallBMS for Smart LiFePO4 Batteries with M8
A simple and low-cost alternative to the VE.Bus BMS. The smallBMS can replace the VE.Bus BMS in several applications. It is however not suitable for use with VE.Bus MultiPlus and Quattro inverter/chargers: it has no VE.Bus interface.
The smallBMS is intended for use with Victron Smart LiFePo4 batteries with M8 circular connectors. The smallBMS has three outputs, similar to the VE.Bus BMS. Load Disconnect output The Load output is normally high and becomes free-floating in case of the cell under voltage (default 2,8V/cell, adjustable on the battery between 2,6V and 2,8V per cell). Maximum current: 1A. The Load output is not short-circuit protected.
The Load output can be used to control:
- A high current relay or contactor.
- The remote on/off the input of a Battery Protect, inverter or DC-DC converter, or other loads.
Pre-alarm output
The pre-alarm output is normally free-floating and becomes high in case of the imminent cell under voltage (default 3,1V/cell, adjustable on the battery between 2,85V and 3,15V per cell). Maximum current: 1A (not short circuit protected).
The minimum delay between pre-alarm and load disconnect is 30 seconds.
Charge disconnect output
The Charger output is normally high and becomes free-floating in case of imminent cell overvoltage or over-temperature. Maximum current: 10mA. The Charger output is not suitable to power an inductive load such as a relay coil.
The Charger output can be used to control:
- The remote on/off of a charger
- A Cyrix-Li-Charge relay
- A Cyrix-Li-ct Battery Combiner
System on/off input
The system on/off input controls both outputs. When off, both outputs will be free floating so that loads and chargers are turned off. The System on/off consists of two terminals: Remote L and Remote H. A remote on/off switch or relay contact can be connected between L and H. Alternatively, terminal H can be switched to battery plus, or terminal L can be switched to battery minus.
Protects 12V, 24V and 48V systems
Operating voltage range: 8 to 70V DC.
LED indicators:
- Load ON (blue): Load output high (cell voltage >2.8V, adjustable on the battery).
- Temp or OVP (red): Charger output free floating (due to cell over temperature (>50°C), cell under temperature (<5 °C) or cell over voltage).
Quick Guide (pdf)
Brochure (pdf)
FAQs
Product & Usage
1. Is your gear authentic and warranty-backed?
Yes — we are an authorized US dealer for 300+ marine electronics brands. Every order ships with the manufacturer’s full warranty.
2. Are these products beginner-friendly?
Yes. Our products are designed for both seasoned boaters and first-time owners. Each unit ships with a manufacturer manual, and we’re happy to answer setup questions over email.
3. Are these products built for marine conditions?
Yes. Marine electronics are engineered for saltwater spray, vibration, and weather. Check the product specs for IPX waterproof rating and saltwater certifications.
Maintenance & Accessories
1. What maintenance does marine electronics require?
Rinse with fresh water after saltwater exposure, store in a dry place, and follow your manufacturer’s cleaning and storage instructions.
2. Can I buy replacement parts and accessories separately?
Yes — we carry replacement parts, mounts, transducers, cables, and accessories for the brands we stock.
3. Do you provide product manuals or installation guides?
Every product ships with the original manufacturer’s manual. Digital copies and detailed installation guides are typically available on the brand’s website.
Warranty & Guarantee
1. Does my purchase include a warranty?
Yes — every order includes the full manufacturer warranty. Coverage length varies by brand (typically 1–3 years for Garmin, Lowrance, Raymarine, Simrad, Humminbird, Furuno, and others).
2. How do I register for warranty coverage?
Register directly with the manufacturer using your unit’s serial number. Manufacturer registration is the fastest path to warranty support if you ever need it.
3. What does the manufacturer warranty cover?
Defects in materials and workmanship under normal use. Damage from impact, improper installation, or saltwater corrosion (without protection) may be excluded. Check brand-specific terms in your unit’s documentation.
4. Can I extend the warranty?
Some manufacturers offer extended-coverage programs through their registration portals. We don’t sell third-party warranty programs.
Purchasing & Support
1. How fast does my order ship?
Orders placed before 4pm EST Monday–Friday ship the same business day via UPS from our NJ or FL warehouses. Continental US delivery typically takes 3–7 business days for Economy.
2. Do you offer bulk or fleet pricing?
Yes — we offer volume pricing for fleet operators, marinas, dealers, and commercial customers. Email support@marineelectronicsdepot.com with your needs.
3. How can I contact support?
Email support@marineelectronicsdepot.com or call during business hours (Mon–Fri 9am–5pm ET). We’re happy to help with pre-purchase questions, order status, or post-sale support.
Can’t find your answer?
Recently viewed
Last seen items
