Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
12-12-3i Power Stabilizer
Feed sensitive electronics with proper voltage, regardless of the battery condition. This stabilizing converter provides continuous, precisely regulated output over the entire range of a battery’s usable voltage. This prevents subjecting loads to fluctuating input voltage, which can cause shutdown, diminish performance, and possibly damage sensitive circuitry.
This converter provides total input/output isolation, virtually eliminating conducted line noise and permitting the connection of negative ground gear to positive or floating ground systems, or vice versa. It can be modified for use as a battery charger, allowing them to maintain a battery at a great distance from the primary voltage source, providing reserve power if the main source fails. The rugged anodized aluminum case is ideal for marine applications.
Application Benefits Include:
- Operate electronics at optimal input voltage, even from nearly drained batteries
- Boost voltage to compensate for voltage drops in long wire runs from batteries
- Eliminate voltage drops during momentary high current drain from batteries, as during engine start
- Eliminate voltage fluctuation from charge sources
- Eliminate voltage overshoot due to sudden removal of high current load
Specifications:
- Input Voltage: 10-16
- Input Amps: 4
- Output Voltage: 13.6
- Output Amps (Intermittent): 3
- Output Amps (Continuous): 3
- Case Size (H x W x D): 3.5 x 3.5 x 1.75 inches (8.9 x 8.9 x 4.5 centimeters)
- Weight: 1 lb. (.45 kg)
- Output: 12 or 24V, nominal, see matrix
- Ripple: 150 mV P-P maximum
- Regulation: 1% Line/Load
Duty Cycle Ratings:
- Intermittent: 20 minutes max on time, 20% duty. Current limit is set at approx. 105% of intermittent rating.
- Continuous: 24 hours, 100% duty
- Idle Current: Less than 100 mA (including power “ON” light )
- Operating Temp: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature.
- Switching Frequency: 40 kHz.
- Efficiency: 85% – Typical.
- Isolation – Output/Chassis; Input/chassis: 250 VDC
Mechanical Specifications:
- Anodized aluminum heat sink case
- Front panel terminal block
- Heavy-duty mounting flange
- Conformal-coated PC board
Options/Factory Modifications:
- Operation as a battery charger (contact factory)
- Parallel/redundant operation (contact factory)
- High-vibration mounting kit
- Non-standard output voltage (contact factory)
Option: Extreme Vibration Mounting Kit
The Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles.
The kit (pictured here) replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a “super shock absorber” for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT–L for units that weigh 2–15 lbs. and Kit–H for units that weigh 16-70 lbs.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.FAQs
Product & Usage
1. Is your gear authentic and warranty-backed?
Yes — we are an authorized US dealer for 300+ marine electronics brands. Every order ships with the manufacturer’s full warranty.
2. Are these products beginner-friendly?
Yes. Our products are designed for both seasoned boaters and first-time owners. Each unit ships with a manufacturer manual, and we’re happy to answer setup questions over email.
3. Are these products built for marine conditions?
Yes. Marine electronics are engineered for saltwater spray, vibration, and weather. Check the product specs for IPX waterproof rating and saltwater certifications.
Maintenance & Accessories
1. What maintenance does marine electronics require?
Rinse with fresh water after saltwater exposure, store in a dry place, and follow your manufacturer’s cleaning and storage instructions.
2. Can I buy replacement parts and accessories separately?
Yes — we carry replacement parts, mounts, transducers, cables, and accessories for the brands we stock.
3. Do you provide product manuals or installation guides?
Every product ships with the original manufacturer’s manual. Digital copies and detailed installation guides are typically available on the brand’s website.
Warranty & Guarantee
1. Does my purchase include a warranty?
Yes — every order includes the full manufacturer warranty. Coverage length varies by brand (typically 1–3 years for Garmin, Lowrance, Raymarine, Simrad, Humminbird, Furuno, and others).
2. How do I register for warranty coverage?
Register directly with the manufacturer using your unit’s serial number. Manufacturer registration is the fastest path to warranty support if you ever need it.
3. What does the manufacturer warranty cover?
Defects in materials and workmanship under normal use. Damage from impact, improper installation, or saltwater corrosion (without protection) may be excluded. Check brand-specific terms in your unit’s documentation.
4. Can I extend the warranty?
Some manufacturers offer extended-coverage programs through their registration portals. We don’t sell third-party warranty programs.
Purchasing & Support
1. How fast does my order ship?
Orders placed before 4pm EST Monday–Friday ship the same business day via UPS from our NJ or FL warehouses. Continental US delivery typically takes 3–7 business days for Economy.
2. Do you offer bulk or fleet pricing?
Yes — we offer volume pricing for fleet operators, marinas, dealers, and commercial customers. Email support@marineelectronicsdepot.com with your needs.
3. How can I contact support?
Email support@marineelectronicsdepot.com or call during business hours (Mon–Fri 9am–5pm ET). We’re happy to help with pre-purchase questions, order status, or post-sale support.
Can’t find your answer?
Recently viewed
Last seen items
