Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
SR-2 Jib Roller
The Forespar® SR-2 Jib Roller with fit shrouds from 3/16” thru 3/8” wire diameter.
Use the proper size pair of insert liners according to the table below:
- 3/8” wire – use no insert
- 5/16” wire – use #1 inserts
- 9/32” wire – use #2 inserts
- ¼” wire – use #3 inserts
- 7/32” wire – use #4 inserts
- 3/16” wire – use #5 inserts
The Jib Rollers may be placed just above or below the spreader tips; however, installation will be easier if located below the spreaders. In this instance, you can pre-assemble the parts while on deck and reduce the possibility of losing parts while hanging in a boatswain’s chair. Have a 3 inch piece of masking tape within handy reach (stick it to the shroud).
Select the proper inserts, place them into the two halves of a hub and fit them around the shroud. Use the tape to loosely hold these parts together. Note that the hubs have two clearance screw holes at one end. Match these with the smaller holes at the other end of the other half. It is important that the mating faces of the inserts are parallel with the faces of the hub halves. Install the four screws supplied, tightening only to the extent that you can still slide the hub assembly up the wire shroud. Now remove the tape.
Next, install the rollers. Note that one half of each roller has clearance holes for the two screws. Mate these halves that don’t have clearance holes. Run these screws tight. Now slide the Jib Roller to the desired position on the shroud and finish tightening the four hub screws until the hub interfaces are fully closed.
FAQs
Product & Usage
1. Is your gear authentic and warranty-backed?
Yes — we are an authorized US dealer for 300+ marine electronics brands. Every order ships with the manufacturer’s full warranty.
2. Are these products beginner-friendly?
Yes. Our products are designed for both seasoned boaters and first-time owners. Each unit ships with a manufacturer manual, and we’re happy to answer setup questions over email.
3. Are these products built for marine conditions?
Yes. Marine electronics are engineered for saltwater spray, vibration, and weather. Check the product specs for IPX waterproof rating and saltwater certifications.
Maintenance & Accessories
1. What maintenance does marine electronics require?
Rinse with fresh water after saltwater exposure, store in a dry place, and follow your manufacturer’s cleaning and storage instructions.
2. Can I buy replacement parts and accessories separately?
Yes — we carry replacement parts, mounts, transducers, cables, and accessories for the brands we stock.
3. Do you provide product manuals or installation guides?
Every product ships with the original manufacturer’s manual. Digital copies and detailed installation guides are typically available on the brand’s website.
Warranty & Guarantee
1. Does my purchase include a warranty?
Yes — every order includes the full manufacturer warranty. Coverage length varies by brand (typically 1–3 years for Garmin, Lowrance, Raymarine, Simrad, Humminbird, Furuno, and others).
2. How do I register for warranty coverage?
Register directly with the manufacturer using your unit’s serial number. Manufacturer registration is the fastest path to warranty support if you ever need it.
3. What does the manufacturer warranty cover?
Defects in materials and workmanship under normal use. Damage from impact, improper installation, or saltwater corrosion (without protection) may be excluded. Check brand-specific terms in your unit’s documentation.
4. Can I extend the warranty?
Some manufacturers offer extended-coverage programs through their registration portals. We don’t sell third-party warranty programs.
Purchasing & Support
1. How fast does my order ship?
Orders placed before 4pm EST Monday–Friday ship the same business day via UPS from our NJ or FL warehouses. Continental US delivery typically takes 3–7 business days for Economy.
2. Do you offer bulk or fleet pricing?
Yes — we offer volume pricing for fleet operators, marinas, dealers, and commercial customers. Email support@marineelectronicsdepot.com with your needs.
3. How can I contact support?
Email support@marineelectronicsdepot.com or call during business hours (Mon–Fri 9am–5pm ET). We’re happy to help with pre-purchase questions, order status, or post-sale support.
Can’t find your answer?
Recently viewed
Last seen items
