Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
Orion-TR Smart Non-Isolated DC-DC Converter - 24 VDC to 24 VDC - 400W - 17AMP
The Orion-Tr Smart DC-DC charger is a professional DC-to-DC adaptive 3-stage charger with built-in Bluetooth.
Bluetooth Smart Enabled:
- Any Bluetooth-enabled smartphone, tablet, or other device can be used to monitor, change settings, and update the charger when new software features become available.
- Instant Readout: The VictronConnect App can display key data, including warnings and alarms, on the device list page without the need to connect to the product.
Fully Programmable:
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-Stage Charge Algorithm: Bulk – Absorption – Float:
- For lead-acid batteries, it is important that during shallow discharges the absorption time is kept short to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery is completely recharged.
- For lithium batteries, the absorption time is fixed (the default is 2 hours).
- Alternatively, a fixed output voltage can be chosen.
Remote On/Off:
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two-pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current:
An unlimited number of units can be connected in parallel.
High Temperature Protected:
The output current will reduce at high ambient temperatures.
IP43 Protection:
When installed with the screw terminals oriented downward.
Screw Terminals:
No special tools are needed for installation.
Input fuse (not replaceable)
Specifications:
- Input Voltage Range: 20-35 V
- Under Voltage Shut Down: 14 V
- Under Voltage Restart: 15 V
- Nominal Output Voltage: 24.2 V
- Output Voltage Adjust Range: 20-30 V
- Output Voltage Tolerance: +/- 0,2 V
- Output Noise: 2 mV rms
- Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 17 A
- Maximum Output Current (10 S) at Nominal Output Voltage: 25 A
- Short Circuit Output Current: 40A
- Cont. Output Power at 25 Degrees C: 480 W
- Cont. Output Power at 40 Degrees C: 400 W
- Efficiency: 89%
- No Load Input Current (2): < 80 mA
- Standby Current: Less than 1 mA
- Galvanic Isolation: 200 VDC between input, output, and case
- Operating Temperature Range: -20 to +55 Degrees C (derate 3 % per °C above 40 °C)
- Humidity: Max. 95 % non-condensing
- DC Connection: Screw terminals
- Maximum Cable Cross-Section: 16 mm² AWG6
- Weight: 1,6 kg (3.5 lb)
- Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)
- Protection Category: IP43 (electronic components), IP22 (connection area)
- Safety Standards: EN 60950
- Immunity Standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2
- Automotive Directive Standards: ECE R10-5
Specifications:
- Charger Input - Voltage: 24v
- Charger Output - Amps: 17a
- Charger Output Voltage: 24v
- Charging Banks: 1
- Portable: No
- Box Dimensions: 4"H x 5"W x 8"L WT: 3.51 lbs
- UPC: 8719076048985
Quick Guide (pdf)
Owner's Manual (pdf)
Brochure (pdf)
FAQs
Product & Usage
1. Are KRANK tools built for professional use?
Yes, all our tools are engineered for heavy-duty performance and long-term reliability.
2. Are KRANK tools safe to use for beginners?
Yes, our tools are designed with safety features and easy handling in mind.
3. Can KRANK tools be used in extreme conditions?
Yes, they are tested to perform reliably in demanding environments.
Maintenance & Accessories
1. What maintenance is required for the tools?
Regular cleaning and proper storage are usually enough to keep your tools in top condition.
2. Can replacement parts or accessories be purchased separately?
Yes, we provide compatible parts and add-ons to extend the life of your tools.
3. Do you provide instruction manuals or usage guides?
Every tool comes with a detailed user manual, and digital guides are available online.
Warranty & Guarantee
1. Do the tools come with a warranty?
Every KRANK tool includes a 1-year warranty, with extended options available on select products.
2. How do I register my KRANK tool for warranty coverage?
You can register online using your product serial number for faster support.
3. What does the warranty cover?
It includes defects in materials and workmanship under normal use conditions.
4. Is there an option to extend the warranty?
Yes, extended warranty plans are available for select tools at checkout.
Purchasing & Support
1. How fast is shipping and delivery?
Orders ship within 24 hours, and delivery typically takes 3–5 business days.
2. Do you offer bulk or corporate purchasing options?
Yes, KRANK provides special pricing and packages for business or team orders.
3. How can I contact customer support if I need help?
You can reach our support team by email or phone — we’re here to assist you.
Can’t find your answer?
Recently viewed
Last seen items
